Material datasheet · Low-alloy steel
AISI 4140 Cr-Mo Alloy Steel
UNS G41400 · Quenched & tempered (commonly delivered Q&T at 28-32 HRC)
The bread-and-butter alloy steel. Strong, tough, hardenable, cheap.
Chemical composition
Nominal % by weight.
| Element | % by wt |
|---|---|
| Fe | Bal. |
| C | 0.38–0.43 |
| Cr | 0.80–1.10 |
| Mo | 0.15–0.25 |
| Mn | 0.75–1.00 |
Applicable specifications
AMS / ASTM / MIL.
- AMS 6382 (annealed bar)
- AMS 6349
- ASTM A29
- ASTM A322
Austenitize 1550°F, oil quench, temper 1100–1200°F to target hardness.
Machining guidance
CNC parameters and tooling.
TiAlN-coated carbide; positive rake for Q&T condition
Pre-hard (28-32 HRC) machines reasonably; harder tempers require slower speeds and rigid setups.
Stock & cost
Forms and Q1 2026 pricing.
- Black oxide (MIL-DTL-13924)
- Phosphate (MIL-DTL-16232)
- Hard chrome plate
- Nickel plate
- Paint
Typical applications
Where 4140 Steel is the right pick.
- Drive shafts
- Hydraulic cylinders
- Gears
- Industrial fixtures
- Firearms components
Alternative materials
Substitute or upgrade options.
- 4340 (higher strength)
- 1045 (cheaper, lower hardenability)
- 17-4PH (no plating needed)
True Precision Machining · Buellton, CA
Machine your part in 4140 Steel.
5-axis CNC · ISO 9001 · AS9100 · ITAR · CMMC-compliant · DFARS-compliant supply chain. AS9102 FAI on aerospace.
Technically reviewed by the True Precision Machining engineering team · Last reviewed June 2026
Standards referenced: AMS 6382 (annealed bar), AMS 6349, ASTM A29, ASTM A322
Keep exploring
Related tools & references
Speeds, feeds, tooling, and chip strategy.
SFM, RPM, and feed rate for this material.
Compare alloys by strength, weight, temperature, and cost.
Estimate part weight from 4140 Steel stock.
Aerospace specs that call out this alloy.