CNC Turning
Daewoo Puma 12S — what we run on it.
Straight CNC turning center with 3.0″ through-bore and 30 HP spindle. Used when a part needs OD/ID turning work without the multi-axis complexity of the Puma SMX or live tooling of the Mori Seiki turn-mills. Fast setup, fast cycle.
Through-bore
3.0″
Spindle
30 HP
Axes
2-axis turn
Live tooling
No
01 · Sweet spot
Straightforward turning, fast turnaround.
Many turning jobs don’t need live tooling, sub-spindles, or 9 axes. The Puma 12S is for those — OD turning, ID boring, threading, parting off. 30 HP gives us enough metal-removal headroom for tougher materials, and the 3″ through-bore handles most production bar.
- Bushings, sleeves, and bearing carriers
- Roller and shaft components
- Adapters, fittings, and threaded inserts
- First-article and prototype turning before production runs go to the SMX or Mori Seiki
- Re-work and repair turning on customer-supplied parts
02 · When NOT to pick this
Wrong-fit jobs.
- Cross-feature work (off-axis holes, hex flats, slots) → Mori Seiki NL2500SY or Doosan TT1800SY.
- Complex 5-axis turn-mill → Doosan SMX 2600ST.
- Bar < 1.0″ high L:D → Tsugami Swiss-type.
- High-volume parallel production → Doosan TT1800SY twin-turret.
Have a part that needs to be made right?
Tell us about your part and we'll quote within 24 hours. Aerospace, medical, and defense work welcome.
Quotes in 24 hours